To obtain the SASO IECEE National Recognition Certificate, the manufacturer or supplier must adhere to the following steps:

1. Electronic registration with the Saudi Standards, Metrology and Quality Organization (SASO) Certification System (Jeem1).
2. Submission of the required technical documents, such as CPTR & CPTC test certificates and reports.
3. Conducting technical tests to ensure compliance with the required standards.
   Payment of the fees associated with issuing the certificate.
4. Requirements for Obtaining the SASO IECEE National Recognition Certificate
   To obtain the SASO IECEE National Recognition Certificate, manufacturers or suppliers must comply with several key

requirements to ensure the product conforms to Saudi standards. These requirements include:

• Submission of a CPTR & CPTC test certificate and report from an IECEE CB-accredited laboratory.

1. The report must demonstrate that the product meets the requirements of the relevant Saudi standard.

• Submission of a copy of the undertaking and declaration of conformity.

1. This is an official document submitted by the supplier declaring that the product complies with Saudi regulations and technical specifications.
2. This is submitted as part of the application for the SASO IECEE National Recognition Certificate.

• Attach a product image and explanatory data.

1. Clear images of the product from different angles must be provided.
2. Include device explanatory data (such as input capacity and current, model number, and brand).
3. Provide a user manual in both Arabic and English, which must meet the requirements of the standard specifications.

Conformity Undertaking and Declaration by the Manufacturer and Supplier

The conformity undertaking and declaration is an official document submitted by the manufacturer and supplier, stating that the product:

1. Complies with Saudi technical regulations and standards.
2. Has been tested and approved according to the required SASO & IEC standards.
3. Is subject to monitoring and follow-up by the competent authorities to ensure continued compliance with the standards.

Contents of the Conformity Undertaking and Declaration Form

• Supplier Data

1. Trade Name
2. Address
3. Commercial Registration Number

• Product Data

1. Device Type
2. Model Number
3. Manufacturer

• Compliance with Specifications

1. Acknowledgment that the product conforms to Saudi standards.

• Signature and Official Seal

1. Signature of the supplier or company representative.
   Official seal verifying the information.
2. National Differences The product’s electrical plug test report must conform to the SASO 2203 standard.